Yida ML-560 M
Technical Specification:
| ITEM | ML-560M | ||
| Standard | C axis | ||
| Capacity | Swing over bed (mm) | Ø560 | |
| Swing over saddle (mm) | Ø420 | ||
| Distance between center (mm) | 750 | ||
| Max. machining dia. (mm) | Ø320 | Ø300 | |
| Max. machining length (mm) | 570 | ||
| Slant angle of bed | 30° | ||
| Travels | X-axis (mm) | 190(160+30) | 190(150+40) |
| Z-axis (mm) | 610 | ||
| Spindle | Spindle speeds (rpm) | 6000 (A2-5);OPT: 4500(A2-6); | |
| Spindle nose | A2-5; OPT:A2-6 | ||
| Spindle bore dia. (mm) | Ø55; OPT:Ø62, Ø76 | ||
| Front bearing inner dia. (mm) | Ø100 | ||
| Draw bar (mm) | Ø45; OPT: Ø52, Ø65 | ||
| Chuck | Chuck diameter (inch) | 6"; OPT:8" | |
| Turret | Turret Type | Hydraulic;OPT:Servo | Live tooling |
| Stations | 10 | 12 | |
| Model | LS-160A*10T | LS-160SP*12T | |
| Square tool shank (mm) | 25x25 | 20x20 | |
| Boring bar shank diameter (mm) | Ø40 | Ø32 | |
| Indexing time (sec) (0~180) | 2 | 0.85 | |
| Live-tooling | Spindle speeds (rpm) | 5000 | |
| Feedrates | Rapid traverse (M/min) | X:30, Z:30 | |
| Tailstock | Type | manual OPT:programmable | |
| Quill diameter (mm) | Ø65 | ||
| Quill bore taper | MT-4 | ||
| Quill travel (mm) | 50 | ||
| Motors | Main spindle (kW) | β8 7.5/11; OPT: β12, α8 | |
| Live-tool (kW) | α2/10000 | ||
| X/Z-axis servo motor (kW) | X:β8/3000 1.2, Z:β8/3000 1.2;OPT: β12, α8 | ||
| Hydraulic oil pump (kW) | 0.745 | ||
| Chip conveyor (kW) | 0.2 | ||
| Coolant pump (kW) | 0.96 | ||
| Accuracy | Positioning | ±0.004 | |
| Repeatability | ±0.003 | ||
| Power | Fanuc (KVA) | 380-415/220V 15KVA | |
| Size | Height (mm) | 1844 | |
| Floor space (L x W) (mm) | 3181X2053 | ||
| Packing (w/conveyor) (mm) | 4040x2280x2180 | ||
| Net weight (w/conveyor) (kgs) | 3660 | ||
| Gross weight (w/conveyor) (kgs) | 4010 | ||
Standard
|
|||||||||||||||||||||||
|
Options Accessories
|
|||||||||||||||||||||||
£42,400.00